Mock ST Knifeless Knifeless Tape Design Line Finish Line Vinyl

• Specification - 10 m/32ft (roll), knifeless design line is a kind of flexible self-adhesive tape

• Package contents: 1 volume of design line; 1*yellow scraper, 1*blue scraper, 2*black edge sticker

• Scope of application - It is mainly applied to design the car surface, which can be adjusted in various directions. The product is so professional that it won't cause any damage to the car's paint.

• High Quality - Knifeless Design Line is made of polymeric fibers. The effectiveness of this product goes beyond knives and plotters. and looks more neat and artistic

• Guaranteed - 100% satisfaction guarantee, buy with confidence without risk.

Specifications *Lightweight: 1.2 oz/unit *Length: tape 10 m/32 ft (roll) *Package contents: 1 volume of design line; 1*yellow scraper, 1*blue scraper, 2*black edge sticker *Convenient and effective. *Cuts like a knife, better - only guaranteed -

Complete vehicle graphic installation without blades. Mock ST Knifeless tape bends easily in any direction and follows the contours, curves and edges of your car. - Easily cuts most vinyl wrap films

-Patented design easily rotates in any direction to follow contours and curves. ・For single or multi-layer vinyl layers -Cut multiple film layers.

There are 7 types of knifeless tapes that can be used depending on the purpose. ⭐Finishline - Edge trimming ⭐Design Line - Complex Design ⭐Trillin - Pinstripe ridge bridge line - wide gap trimming er perline - perforated window film ⭐PPF Line - Transparent protective film ⭐Precision Line - Edge Trimming Tough Film Convenient and effective. There is a thin line of strength on the back of the tape. Once the thin lines are separated, Knifeless Designline becomes a powerful tool that can perfectly cut wrapping film. It is as sharp as a blade even without burrs.

How to use How to use Step 1: Pull out the product and stick it on the car surface as the designed shape. Step 2: Paste 100mm wide car wrapping film to bring out the fine lines. Step 3: While pressing the tape with your left hand, slowly pull out the thin line with your right hand. Step 4: Trim the waste and pull out the remaining adhesive tape.

service If you have any questions, please feel free to contact us.