Ceramic Grout 1- 037

Atlas Ceramic Grout 1-20 mm 2kg

ATLAS CERAMIC GROUT in color 037 - can be used for various facings (e.g. mosaic, terracotta, stoneware, etc.) on a variety of surfaces, even the most difficult ones (even terrazzo or plasterboard!). It can be used both indoors and outdoors.

Atlas Flexible Grout is a highest quality product that will satisfy every professional. Ideal for humid rooms, such as kitchens, bathrooms, balconies and terraces, as well as facades.

Flexible, waterproof, fiber-reinforced grout, which is used for stoneware. This is a high-quality product characterized by excellent abrasion resistance and very fast setting.

Product advantages and features - Super smooth - perfect effect without any effort. - Very easy application allows for even application, making the grout durable and safe. - Dirt-resistant, allowing you to enjoy cleanliness for longer. - Mold and algae-resistant, extending its durability. - The use of special polymer resins and a combination of fibers forming structural reinforcement prevents both shrinkage cracks during the setting stage and dynamic and thermal loads during use. - Resistant to scrubbing and repeated washing - cleaning does not deprive the grout of its hydrophobic and oleophobic properties (the grout reaches full scrubbing resistance after 21 days). - Resistant to temperatures ranging from -30 °C to +80 °C.

Application Method

Substrate Preparation

Gaps between tiles should be thoroughly cleaned. They should be of equal depth - excess adhesive should be removed as needed during installation. Immediately before grouting, clean the tile surface with a damp sponge. In the case of excessively dry tiles, slightly dampen the joints to limit and even out the substrate's absorbency.

Grout Preparation

Pour the contents of the package into a container with a measured amount of clean water (proportions given in the Technical Data) and mix until a uniform consistency is achieved. This can be done manually or mechanically. The mass is ready to use after approximately 5 minutes and after remixing. It should be used within approximately 60 minutes. Once the mortar is prepared, do not add water or dry powder.

Grouting

The grout should be applied deeply and tightly into the joints using a rubber trowel. The trowel should be moved diagonally to the edges of the tiles, holding it at an angle of approximately 45° to the surface of the floor covering.

Cleaning

Cleaning consists of three stages: pre-washing, profiling, and final washing.

Pre-washing

After matting the grout in the gaps between the tiles, wash the entire surface of the floor covering with a damp sponge (usually after 10-30 minutes) to remove dirt and tarnish from the tiles. The sponge should be frequently rinsed in clean water and squeezed thoroughly to avoid adding too much water to the grout. Avoid creating puddles and removing excess water from the grout surface. Excess water while washing can result in an uneven grout color. The time it takes to wash depends on the prevailing temperature and humidity conditions and the type of tile. Starting pre-washing too late (after the grout has started to set) may result in a grout shade different from that shown in the sample.

Profiling

This is usually performed during the pre-washing stage, before the grout has hardened. For profiling, use tile sponges slightly dampened with water.

Final washing

This is performed after the grout has hardened, after 4-8 hours. It involves washing the entire surface of the cladding again with a damp sponge.

Care

The grout should be protected from drying out too quickly.

Using the cladding

Light foot traffic is possible after approximately 12 hours after grouting. The grouted surface can be fully loaded after approximately 24 hours.

Parameters: - Brand: Atlas - Color: 037 - Capacity: 2 kg - Application: Rubber trowel - Joint thickness: 1 - 20 mm - Application temperature: From +5 °C to + 30 °C - Ready for work time: Approx. 1 hour - Foot traffic: After approx. 12 hours - Full load: After approx. 24 hours - Application: Tile grout - Price is for one piece

Brand: Atlas Application: Tile grout Thickness: 1 - 20 mm