SIHAO 3500A 1.8KW Spot Welder, 2 Welding Guns Dent Puller for Bonnet Roof Panel, 0.6-1.2mm Auto Body Repair Machine

Pakend oli tugev ja sisaldas kõike kahjustusteta. Treipink on piisavalt võimas, et lõigata kroom-molübdeen terast. Olen seni testinud pehmet terast, kroom-molübdeen terast ja alumiiniumi. Kõvemad metallid lõikuvad kareda pinnaga, kuid see võib olla ka minu lõikekiirus ja tööriistade sobivus. Kasutamise käigus on ristliugurisse tekkinud lõtk, kuid reguleerimisliistude pingutamine lahendas selle proble probleem. Masin oli muidu karbist välja võttes üsna tasakaalus. Ainus lahendamata probleem on lahtine tööriistahoidik. Pean ristliuguri lahti võtma, et pääseda ligi mõnele kuuskantkruvile ja neid reguleerida. Muidu, peale mõne lahtise kruvi, on see treipink suurepärane masin. Arvan, et pärast reguleerimist suudan kõvades metallides saavutada täpsuse tuhandikku tollini, kuigi pinnale jääb mõningane väike defekt, mida saab lihvpaberiga poleerida.

Otsisime oma hiljutiseks kaheksanädalaseks autoreisiks Prantsusmaal külmik-kompressorit ja ausalt öeldes ületas see kõik meie ootused.. Ehitatud kvaliteet tundub väga vastupidav ja esmaklassiline. See näeb elegantne välja ja sobib meie puidust lauale suurepäraselt (nagu fotolt näha!). Digitaalset juhtpaneeli on ülimalt intuitiivne kasutada ja see, et selle kaanel on need käepärased tassihoidjad, on geniaalne lahendus – enam ei pritsi kohvi konarlikel teedel.! See on ka uskumatult energiasäästlik; see töötas meie 12V vabaajabaterii peal, seda tühjaks laadimata. Tugevad käepidemed teevad selle ümber kandmise lihtsaks ja selle suurus on täiuslik—piisavalt suur nädala toidukaupade jaoks, kuid piisavalt kompaktne, et mitte kogu põrandapinda hõivata.

I got this delivered a few days ago. It was well-packed, no damage at all. I used two 3/4in bolts in the back to secure it to the drill press table. This allowed the front adjustment wheel clearance to hang over the edge. I bolted my Palmgren vise to it. I don't know what the fuss is about. Is it a precision milling machine X-Y traversing table? No. Is it a good X-Y table for holding stuff while drilling in a home shop? Absolutely. I am using it straight out of the box, no filing and just a bit of fussing. I could complain about some small stuff, but for just over 100€, it is a bargain.

I plugged it into the 12V socket, hit the button, and it lifted my car in under two minutes. It was so effortless and stable—no struggling, no sweating. The built-in LED light was a massive help since it was getting dark. As you can see in the second photo, everything comes neatly packed in a tough, heavy-duty plastic case. It fits perfectly in my trunk without taking up too much space. They even included a pair of work gloves and a safety vest (or spare fuses), which shows they actually thought about the user's experience.

It's very compact and lightweight, making it easy to mount on the wall without taking up much space. Just make sure you follow the safety warnings and install it in a well-ventilated area with proper exhaust, which is exactly what I did. If you are looking to build an outdoor shower, a campervan setup, or a remote cabin water system, this is an absolute game-changer. It’s brilliant, reliable, and does exactly what it says on the box.

The locking system is simple and well thought out, note that you need to clean the tank gasket well with a little soap and a soft toothbrush for example. Grease occasionally with silicone grease to prevent leaks. Low noise, I made a hood with foam to reduce noise, and vents for cooling, although it does not heat up enormously. This is my opinion on this small product that deserves to exist. Good DIY to all of you.

Kena väike masin, oli tehasest hästi seadistatud, lisasin paar täiendust, nagu kiirvahetustööriistahoidik ja pöörlev tsentreerija, samuti terasest hammasrataste komplekt. Veetsin veidi aega poltide kontrollimiseks, liugude reguleerimiseks, puhastamiseks, tsentri joondamiseks padruniga. Tunnistan, et kõik oli üsna täpne ja masin töötab vaikselt.

The cross slide is very accurate and I generally use it to make cases and trim parts. It’s able to cut presiding parts. Mind you I’m trained and patient, learn your lathe and take the time to mess up some stuff. I’ve used it for so many things and parts, I hope you all enjoy it as well.