3‑40km Electric Fence Charger Solar Battery Powered Electric Fence Kit for Preventing Wild Animals Intruding CN

Feature: 1. Working Principle: The electric fence charger the 12V voltage to a high intensity pulse voltage of 12,000 volts through the pulse boosting module, and connects and transmits it to the wire mesh. When the animal approaches and contacts the conductive wire of the fence, the high voltage pulse will give the animal a strong high voltage Shock sensation, but the pulse duration is very short (0.2 seconds) so will only give a stern warning to touching animals. 2. Not Harm Animals: The electric fence charger will not harm the animals. After being warned a few times, the animal will form a conditioned reflex not to touch the fence again. Honestly move within the fence. 3. Product Parameter: Discharge interval is 1.0s or 1.5s mode, equipment power is less than 3W, 2 inch screen, use environment is ‑20 celsius +50 celsius temperature, relative humidity is less than 95percent , voltage output is 8 10 12KV, pulse width 100 us (1 10000 second). 4. Multiple Power Supply Methods: The power adapter uses the mains power supply dry battery to directly supply power (DC 12V), solar power supply, including solar power panels, batteries, solar panel power generation controllers. 5. Applicable Scenes: Suitable for pastures, farms, zoos, etc., which can limit the scope of activities of captive animals. Also be used in farms, forest farms, fruit and vegetable gardens, etc., which can prevent wild animals from entering the planting area and destroying crops. Specification: Item Type: Electric Fence ChargerMaterial: ABS Color: As Pictures Shown Weight: Approx. 1400g 3.1lb Device Model: TT P6 Equipment Size: Approx. 180x200x80mm 7.1x7.9x3.1in Remote Control: 315mhz, Capacity: 210mAh CR2032 Lithium Battery (Shipped with Built in Battery) Equipment Power Supply: DC 12V 2A or Solar Power Supply Equipment Power: less than 3W Screen: 2 Inches Use Environment: Temperature 20 celsius +50 celsius Relative Humidity: Less Than 95percent Pulse Width: 100 us (1 10000 second) Discharge Interval: 1.0s or 1.5s Mode Single Cable Reachable Length: 3 40km 3280 43745yd Energy Output: 3 7J Alarm Mode: Disconnection Alarm Alarm Buzzer Output: 90db Alarm Output: Normally Open Normally Closed + Indicator Light Indication Backup Battery: 12V 20A Control Method: Local Button Arm and Disarm, Remote Control Arm and Disarm. Package List: 1 x Electronic Fence Host 3 x Cable1 x Manual1 x Adapter1 x Remote Control Note: 1. Installation Precautions: The voltage generated by this product is a pulse voltage, which is a high voltage low current product. The discharge interval is set to more than 1 second by default, and the discharge time is 0.1 second. The discharge interval will be set according to the different models and requirements of the equipment when leaving the factory.2. This product is operated under high voltage, please do not disassemble it without authorization to avoid electric shock.3. The output and front end of the product have a high voltage of 5000V 10000V. Do not touch the product when it is working; please correctly install the alloy wire of the front guardrail and the correct circuit before installing the host. Do not install the host with power on. Do not install electric fence during lightning. Do not install the pulse host directly outdoors or in a humid place.4.