Hub HMC-6M2 USB-C 3.2 Gen 1 hub w. M.2 SATA + HDMI + GLAN + 2x USB-A + PD 100W

Hub HMC-6M2 USB-C 3.2 Gen 1 hub w. M.2 SATA + HDMI + GLAN + 2x USB-A + PD 100WHub HMC-6M2 USB-C 3.2 Gen 1 hub w. M.2 SATA + HDMI + GLAN + 2x USB-A + PD 100WHub HMC-6M2 USB-C 3.2 Gen 1 hub w. M.2 SATA + HDMI + GLAN + 2x USB-A + PD 100WThe AXAGON HMC-6M2 USB-C hub is designed to extend a laptop, tablet, or compatible phone with several useful connections in one compact device. It combines data ports, video output, wired networking, and an M.2 SATA drive enclosure, helping reduce the need for multiple separate adapters.

It is suitable for everyday office work, home setups, and mobile use where a single USB-C connection needs to support several peripherals at once. The hub can be used to connect external storage, a monitor, a wired network, and USB accessories while keeping the workspace organized.

One of the main benefits of this model is the combination of practical functions in a single unit. It provides two USB-A ports for common accessories, HDMI for display connection, Gigabit Ethernet for a stable network link, and support for Power Delivery charging while the hub is in use. This makes it useful in setups where both connectivity and power are needed through one USB-C port.

The integrated M.2 SATA support adds further flexibility by allowing connection of a SATA-based M.2 SSD. This is helpful for expanding storage, accessing data, or using an external drive without a separate enclosure. The USB-C 3.2 Gen 1 interface is intended for simple plug-and-play use with compatible devices and modern laptops equipped with USB-C.

Built for practical daily use, the hub is a compact accessory that brings together several commonly used interfaces in one device. Its combination of ports supports both work and general multimedia use, while the wired connections help maintain a tidy and functional setup. The design is focused on straightforward operation and reliable connectivity for compatible devices.

Specifications: Product name: AXAGON HMC-6M2 Type: USB-C hub Interface: USB-C 3.2 Gen 1 Ports: 2x USB-A Video output: HDMI Network: Gigabit Ethernet (GLAN) Storage support: M.2 SATA Power Delivery: up to 100 W Function: Multiport hub with integrated M.2 SATA supportType: LANInterface: USB-CI/O ports: 1 x 10/100/1000 Mbit/sI/O ports : 1 x HDMII/O ports : 2 x USB 3.0 Type AI/O ports : 1 x USB 3.0 Type CStandards: 802.3Standards : 802.3abStandards : 802.3uSupported operating systems: Windows 11Supported operating systems : Chrome OSSupported operating systems : LinuxSupported operating systems : Mac OSSupported operating systems : Windows 10Supported operating systems : AndroidAccessories included: USB-C hub with 18 cm fixed cable, Mounting material, Printed installation instructions, Packed in cardboard box with hanging holeDimensions: 123 x 51 x 14 mm, USB cable length 18 cmOther features: Input: USB output: HDMI output: RJ-45 Output: Support for Wake-on-LAN functionality in various modes: Advanced Power Management: Power Delivery: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector., Backwards compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0., Compatible with Thunderbolt 3., USB connection port with type C male connector located on an 18 cm long cable., 2x SuperSpeed USB port, USB-A female connector., 1x SuperSpeed USB port Power Delivery (for charging only), USB-C female connector., Transmission rate support 5,000 / 480 / 12 / 1.5 Mbps (SuperSpeed / High / Full / Low speed)., The overall permeability / transmission speed of the case is given by the USB 3.2 Gen 1 interface used (theoret. up to 5 Gbit/s)., The USB-C hub can permanently support two external drives., HDMI., HDMI A (F) female connector., Maximum supported resolution 4K / 4096 x 2160 @ 30Hz., A USB-C connector with support for DisplayPort Alternate Mode (DP Alt Mode) or USB-C with support for Thunderbolt 3 is required to properly support video output. A suitable operating system is also required. The video output function will not be available if these requirements are not met., Hot Plug (Hot-Plug-Detect) support., TMDS (Transition Minimised Differential Signalling) support., Full support for HDCP 1.4 a 2.3 (High-bandwidth Digital Content Protection)., Audio up to eight LPCM channels, support for audio compression (AC-3, DTC) and HBR audio., Sampling frequency up to 192 kHz and support for 24-bit audio - depends on source and target device, e.g. notebook/phone and TV/display/ AV receiver., Gigabit Ethernet interface with RJ-45 connector for connection via UTP or STP cable., Supports 10/100/1000 Mbps Ethernet interface transmission speeds., Supports IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications., 10/100/1000 Mbit/s auto-discovery., Support of IPv4/IPv6 packet Checksum Offload Engine (COE) to reduce CPU load for total IPv4 IP/TCP/UDP/ICMP/IGMP & IPv6 TCP/UDP/ICMPv6 control and checksum generation., Support of TCP Large Send Offload V1 and V2., Support IEEE 802.1P Layer 2 priority encoding & decoding., Support for IEEE 802.1Q VLAN tagging., Support IEEE 802.3az EEE (Energy Efficient Ethernet)-reduce idle power consumption., Jumbo frame support., Supports full-duplex transmission with IEEE 802.3x congestion control and half-duplex transmission with reverse flow control., Support for Auto MDI/MDIX crossover detection and autocorrection eliminates the need for crossover cables., Hardware Cyclic Redundancy Check (CRC) support for transmission error discovery., Pair Swap/Polarity/Skew Correction support., Support for sleep and remote wake-up modes using Magic paket, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! as well as Link Change Wake-up., The adapter supports advanced management and advanced power saving when disconnected from the Ethernet cable. Support for Advanced Configuration Power management Interface (ACPI) Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and more., Support for Power Delivery 3.0 - continuous power to the device from the network adapter via the USB-C hub., Maximum power supply via the PD output of the USB-C hub 100W - 20V/5A., Requires a notebook or phone with support for Power Delivery charging from a USB-C port and a suitable network PD adapter.EAN: 8595247905796Manufacturer: AXAGON38.08Axagon